Skip to main content

how to create a bootable USB drive (Pen Drive) for system format

 Here's how to create a bootable USB drive:


Insert a blank USB drive into your computer.


Download the Windows 10 ISO file from the Microsoft website (https://www.microsoft.com/en-us/software-download/windows10).


Download and install a tool for creating bootable USB drives, such as Rufus (https://rufus.ie/).



Open Rufus and select the USB drive you want to use.


In the "Boot selection" section, click the "Select" button and choose the Windows 10 ISO file you downloaded.


Make sure "File system" is set to NTFS.


Under "Create a bootable disk using," select "ISO Image."


Click the "Start" button to begin the process.


Wait for the process to complete. This may take a few minutes.


Once the process is complete, you should have a bootable USB drive that you can use to install Windows 10 on your PC.


Note: Before creating a bootable USB drive, make sure to backup all important data on the USB drive as the process will erase all data on the drive.

Labels:

Comments

Post a Comment

Popular posts from this blog

How to configure STP on a switch

Spanning Tree Protocol (STP) is a networking protocol used to prevent loops and ensure a loop-free topology in a network. STP is typically configured on network switches to prevent the formation of loops and to ensure the stability of the network. Here are the steps to configure STP on a switch: Access the switch's command line interface (CLI) using a terminal program like Telnet or SSH. Configure the switch as the root bridge by setting its bridge ID to a lower value than any other switch in the network. The bridge ID is typically a combination of the switch's MAC address and a priority value. Configure the switch's ports. Each port should be configured as either a root port, designated port, or blocked port. The root port is the port that is closest to the root bridge and is used to forward traffic to the root bridge. The designated port is the port that is closest to a downstream switch and is used to forward traffic to that switch. The blocked port is a port that is not
Post a Comment
Read more