Skip to main content

HOW TO DOWNLOAD WINDOWS 10 ORIGINAL

 You can download Windows 10 from the Microsoft website using the following link: https://www.microsoft.com/en-us/software-download/windows10

Go to the link and select "Download tool now."




Run the tool and select "Create installation media (USB flash drive, DVD, or ISO file) for another PC."


Choose your language, edition, and architecture and click "Next."


Select the option to create a bootable USB drive or save an ISO file, then follow the on-screen instructions to complete the process.


Use the bootable USB drive or ISO file to install Windows 10 on your PC.


Note: Before downloading, make sure your device meets the system requirements for Windows 10. If you're upgrading from an older version of Windows, you'll need to have the product key for that version.

Labels:

Comments

Post a Comment

Popular posts from this blog

How to configure STP on a switch

Spanning Tree Protocol (STP) is a networking protocol used to prevent loops and ensure a loop-free topology in a network. STP is typically configured on network switches to prevent the formation of loops and to ensure the stability of the network. Here are the steps to configure STP on a switch: Access the switch's command line interface (CLI) using a terminal program like Telnet or SSH. Configure the switch as the root bridge by setting its bridge ID to a lower value than any other switch in the network. The bridge ID is typically a combination of the switch's MAC address and a priority value. Configure the switch's ports. Each port should be configured as either a root port, designated port, or blocked port. The root port is the port that is closest to the root bridge and is used to forward traffic to the root bridge. The designated port is the port that is closest to a downstream switch and is used to forward traffic to that switch. The blocked port is a port that is not
Post a Comment
Read more