Skip to main content

What is electric charge and its discovery

Electric charge is a basic property of matter that causes it to experience a force when placed in an electric field.



It is a scalar quantity and can be either positive or negative. Electric charges are responsible for many of the phenomena that we experience in our daily lives, including static electricity, electric currents, and electromagnetic forces.

It's Discovery: -

The discovery of electric charge is usually attributed to the English scientist William Gilbert in the late 16th century. Gilbert conducted various experiments with static electricity and magnetic materials and was the first to use the term "electricus" to describe the phenomenon of charged objects. However, the concept of electric charge can be traced back to the Greek philosopher Thales of Miletus, who observed that rubbing certain materials against each other could cause them to attract or repel each other. Over the centuries, various scientists and inventors have made important contributions to our understanding of electric charge, including Stephen Gray, Benjamin Franklin, and Charles-Augustin de Coulomb.

Comments

Popular posts from this blog

How to configure STP on a switch

Spanning Tree Protocol (STP) is a networking protocol used to prevent loops and ensure a loop-free topology in a network. STP is typically configured on network switches to prevent the formation of loops and to ensure the stability of the network. Here are the steps to configure STP on a switch: Access the switch's command line interface (CLI) using a terminal program like Telnet or SSH. Configure the switch as the root bridge by setting its bridge ID to a lower value than any other switch in the network. The bridge ID is typically a combination of the switch's MAC address and a priority value. Configure the switch's ports. Each port should be configured as either a root port, designated port, or blocked port. The root port is the port that is closest to the root bridge and is used to forward traffic to the root bridge. The designated port is the port that is closest to a downstream switch and is used to forward traffic to that switch. The blocked port is a port that is not